A good on-site environment can give full play to the best working state of the supermarket anti-theft system access control.

When your supermarket anti-theft system was first installed, the equipment was very easy to use, but after a period of use, it may appear insensitive or false alarm. What is the reason?

1. You can guard against theft as long as you stick an anti-theft label.
Anti theft detection door and anti-theft label are indispensable;


2. Soft labels can be pasted any way.
The anti-theft soft label shall be pasted on a dry and flat surface and shall not be bent. The bending of the label will reduce its sensitivity, and it is basically invalid if it exceeds 15 degrees;


3. After the anti-theft device is installed, it is basically not managed by people;
According to the magnetic field voltage and other factors, the wireless detection equipment must conduct patrol inspection and test every day. If it is found to be insensitive or too sensitive, fine tune the sensitivity to ensure the best state.


4. Add any other electrical equipment around the anti-theft device;
Do not have any electrical appliances or motors that can generate magnetic fields within 1.5m around the anti-theft device.


5. Add atmosphere during the festival and put colored lights on the anti-theft device;
Anti theft detector and misplacing lamps will affect the operation of the equipment.


6. The anti-theft door of the supermarket is forbidden to be used outdoors;
The anti-theft door of the supermarket is not allowed to be put outdoors and is not waterproof.